What to Do When Your iPad Isn't Charging or Turning On

Welcome to our iPad repair blog! We'll talk about one of the most frequent issues iPad users have in this post: the device won't charge or turn on. We've developed a list of potential causes for your iPad not charging or turning on since we know how annoying it can be when your iPad isn't functioning correctly.

Possible Reasons Why Your iPad Isn't Charging or Turning On

Let's investigate and discover the potential causes of the problem.

1. defective charging cable

It's possible that the charging cable you use to power your iPad has developed damage, which would explain why it won't charge.

2. An inoperative power adapter

If the power adapter is not functioning properly, your iPad could not be charging. To test whether it fixes the issue, you might try a new power adapter.

3. A dirty port for charging

Your iPad may not be able to charge because the charging port has become unclean or clogged with debris. You could try using a soft brush or toothbrush to clean the charging port.

charging. You can attempt restarting your iPad or doing a factory reset.

5. Battery Issues

If your iPad's battery is harmed or worn out, it could not be performing properly. The battery might need to be changed in this situation.

6. Water Damage

Your iPad could not be charging or turning on if it has been in contact with water or other substances. You ought to take it to an expert repair provider in this situation.

7. An unreliable USB-C port or Lightning connector

Due to wear and tear, Lightning connections and USB-C ports might degrade or get broken over time. Even after trying every remedy, this may prevent your iPad from charging or turning on.

It's time to get expert assistance if you've tried everything listed above and your iPad is still not charging or turning on.

Professional iPad Repair at uBrokeiT

Battery replacement, charging port repair, and water damage repair are just a few of the many services we do at uBrokeiT for iPads. You can rely upon our team of knowledgeable repair specialists will quickly get your iPad back up and running since they have years of expertise fixing Apple products.

If your iPad needs micro soldering or a new USB-C port, our knowledgeable specialists can identify the problem and resolve it without causing any harm to the glass or LCD of your device. It takes a lot of ability and accuracy to repair damaged circuit boards using the micro soldering technique.

You can trust that when you bring your iPad to uBrokeiT for repair, we'll only identify and resolve charge problems using cutting-edge methods and high-quality replacement components.

Why Won't My iPad Charge

Did your iPad just out of nowhere stop charging? Maybe you noticed that you were low on a charge and were trying to finish that last match of Golf Clash and it went dead. You quickly plug in and hope to see that lightning bolt appear so you can get back to your round of golf and….NOTHING! Well, there can be some easy fixes and uBrokeiT is here to help.

Why Won’t My iPad Charge?

If your iPad isn’t taking charge, the issue might be one of the following things

• The iPad lightning cable

• The iPad power adaptor

• The iPad charging port

• The iPads motherboard

Let’s discuss each of the above issues

Lightening cable issues

Often people think that a lightning cable will last a lifetime, this is defiantly not the case. Many times a cable can become frayed or kinked. When this happens the cord isn’t carrying the proper amount of current to the iPad in order for it to charge. Another issue is when the tip of the connector is dirty or has become damaged. When this occurs it is time for a new cable.

Power adapter issues

Something we see here often at uBrokeiT is that people often use a wall adapter/ brick that is meant for another device. I can’t express enough how bad this can be for your device! The adapter/ brick that comes with your device is specifically rated to send the current required to charge. When you use another adapter/ brick you can be sending too little, or way too much for your device. This can either cause it to take forever to even see a glimpse of charge, or possibly to catastrophic damage to the motherboard.

Charging port issues

Sometimes from daily charging dust, particles, or even food can get inside of the charging port. Also, many cheap aftermarket charging cords tips often break off and can become lodged inside of the port. When this occurs it will seem that the charger isn’t sitting correctly or won’t go in all the way. There are ways with some research to clean this yourself, but taking it to your local iPhone repair shop can not only save you some money but take away the risk of you damaging the delicate pins inside of the port.

Motherboard charging issues

As mentioned above, using a frayed cord or the wrong adapter/ brick can be the answer to solving your charging issues. But when doing so it can also cause further damage to the device’s motherboard. When such damage occurs, a specialty service is required. It is suggested to reach out to your local iPad repair shop to discuss what they can do for you.